|
Do I have to adjust
sound IN and OUTPUT levels?
Yes, you need to adjust your mic-in volume. As the Noise
cancelling microphone is very sensitive, we achieved excellent
results with most sound cards by setting the mic-in level to
only about 60%. However, most Internet Telephony applications
today come with their own Volume Set-up Wizard, so just follow
the indications on the screen.
Speaker output level of the sound card can be left at MAX
because you have a volume control on the VNC-Handset
How and where do I
mount the VNC-Handset?
If the front-panel
of your monitor is large enough, we suggest fixing the VNC-Handset
holder on the left front-panel of your monitor. If the
front-panel is too narrow you may fix the holder on the side of
your monitor.

The cable clamp
should be fixed on the side towards the top of your monitor to
hold the spiral cord conveniently out of your way.
IMPORTANT:
Before fixing the holder, clean the mounting area with soap and
water, (do NOT use any solvent) and let it dry for a few hours.
Pull off the foil from the adhesive tape and press the holder
firmly against the mounting surface.
Wait a few hours before hanging up
the VNC-Handset for maximum adhesion.
For further
information please check our website at:
http://www.cha-ching-chat.com
|